DRILL PRESS WITH DRIVE BELT

Art. 0260
635,00
VAT EXCLUDED
NEW BELT TENSION DEVICE, DRILLING DEPTH READOUT, LED LIGHT INCLUDED, ROTATING AND INCLINABLE TABLE
Max drilling capacity on steel with pre-drilling hole(s235jr)
Ø 16 mm
Continuous drilling capacity
Ø 12 mm
Self-centering chuck MT
2 - ø 13 mm
Table dimensions
290 x 290 mm
Slot
16 mm
Spindle travel
85 mm
Height
980 mm
Distance chuck-column
162 mm
Distance between spindle nose and table
435 mm
Quill
ø 40 mm
Column
ø 72 mm
Distance between spindle nose and base
625 mm
Approx spindle speeds
(16) 180 ÷ 2770 rpm
Single-phase motor
230 V 50 Hz 550 W
Sound pressure level
70,3 ± 3,2 dB(A)
Sound pressure at operator's position
76.4 ±4.0 dB(A)
Sound pressure at operator's position
76.4 ±4.0 dB(A)
Sound pressure at operator's position
76.4 ±4.0 dB(A)
Level vibration transmitted to hand-arm
1.86 ± 0.9 m / s2
Level vibration transmitted to hand-arm
1.86 ± 0.9 m / s2
Level vibration transmitted to hand-arm
1.86 ± 0.9 m / s2
EAN Code
8012667254209
Weight
50 kg
Privacy | General Conditions of Sale | Site map
FERVI SpA - Via del Commercio 81 - 41058, Vignola (Modena) - Cap.Soc. € 2.539.240 i.v. - Reg. Imprese Mo (Italia), C.F. e P.I. 00782180368 • REA Mo 184870.