This website uses "cookies". If you choose to continue using the website, you are
authorising the use of cookies according to our cookie policy. For further information
or to deny the use of some cookies, please click here.
Accept
PRECISION LIVE CENTER SET
Art. C050/4
MAINLY USED IN LATHES WITH THE AIM OF STABILIZING LONG AND THIN PIECES, MORE SUBJECT TO BENDING OR UNCONTROLLED OSCILLATION CAUSED BY THE FORCES GENERATED DURING MACHINING. COMPLETE WITH 7 INTERCHANGEABLE INSERTS AND EXTRACTOR FOR THE INSERTS.
| Spindle taper MT |
A |
B |
C |
D |
E |
F |
G |
rpm max |
Maximum capacity |
Gross weight |
EAN Code |
| 2 |
L2 39 mm - D2-D3 16 mm - α 60° mm |
L2 35,5 mm - D2-D3 16 mm - α 75° mm |
L2 33 mm - D2-D3 16 mm - α 90° mm |
L2 46 mm - D2-D3 16 mm - α 60° mm |
L2 40 mm - D2-D3 25 mm / 10 mm - α 60° mm |
L2 36 mm - D2-D3 16 mm / 10 mm - α 60° mm |
L2 39 mm - D2-D3 20 mm / 16 mm - α 60° mm |
5000 g/min |
45 kg |
1,32 kg |
8012667244682 |
| 3 |
L2 48 mm - D2-D3 20 mm - α 60° mm |
L2 43,5 mm - D2-D3 20 mm - α 75° mm |
L2 40,5 mm - D2-D3 20 mm - α 90° mm |
L2 56 mm - D2-D3 18 mm - α 60° mm |
L2 50 mm - D2-D3 35 mm / 15 mm - α 60° mm |
L2 42 mm - D2-D3 22 mm / 18 mm - α 60° mm |
L2 48 mm - D2-D3 35 mm / 30 mm - α 60° mm |
5000 g/min |
150 kg |
2,18 kg |
8012667205201 |
| 4 |
L2 61,5 mm - D2-D3 28 mm - α 60° mm |
L2 55,5 mm - D2-D3 28 mm - α 75° mm |
L2 51,5 mm - D2-D3 28 mm - α 90° mm |
L2 69 mm - D2-D3 26 mm - α 60° mm |
L2 61,5 mm - D2-D3 50 mm / 28 mm - α 60° mm |
L2 55 mm - D2-D3 40 mm / 35 mm - α 60° mm |
L2 60 mm - D2-D3 55 mm / 48 mm - α 60° mm |
5000 g/min |
240 kg |
3,88 kg |
8012667011178 |