This website uses "cookies". If you choose to continue using the website, you are
authorising the use of cookies according to our cookie policy. For further information
or to deny the use of some cookies, please click here.
Accept
AUTOMATIC PRECISION BORING HEAD
Art. T021/030
TO SLIGHTLY CORRECT THE AXIALITY AND DIAMETER OF THE HOLES. IT CAN WORK AUTOMATICALLY AND MANUALLY.
Max facing and boring ø |
Max stroke of slide |
Fine feed per graduation |
Manual feed per revolution |
Self acting feed per revolution |
ø of tool post holes in head |
Max ø of head |
Height of head without shank - (H) |
Weight of head without shank |
Length of sliding block |
Width of sliding block |
Collets hole |
Accessories |
Extension hole for tool holder |
Shank |
Gross weight |
EAN Code |
150 mm |
±15 mm |
0,005 mm |
2 mm |
0,02-0,04-0,06 0,08-0,10-0,12 mm |
18 mm |
90 mm |
87,5 mm |
2,9 kg |
75 (L) mm |
70 (B) mm |
4 - 8 - 12 ø mm |
1 - 2 - 6 |
Ø 6 mm |
ISO40 - DIN2080 |
8,45 kg |
8012667002909 |
150 mm |
±15 mm |
0,005 mm |
2 mm |
0,02-0,04-0,06 0,08-0,10-0,12 mm |
18 mm |
90 mm |
87,5 mm |
2,9 kg |
75 (L) mm |
70 (B) mm |
4 - 8 - 12 ø mm |
1 - 2 - 6 |
Ø 6 mm |
CM3/MT3 - DIN 228A |
7,46 kg |
8012667196523 |
350 mm |
±25 mm |
0,005 mm |
3 mm |
0,03-0,06-0,09 0,12-0,15-0,18 mm |
22 mm |
120 mm |
118 mm |
6,1 kg |
105 (L) mm |
90 (B) mm |
8 - 10 - 12 - 14 ø mm |
1 - 2 - 3 - 4 - 5 |
Ø 10 mm |
ISO40 - DIN2080 |
16,00 kg |
8012667002916 |
450 mm |
±50 mm |
0,005 mm |
3 mm |
0,03-0,06-0,09 0,12-0,15-0,18 mm |
22 mm |
168 mm |
118 mm |
7,8 kg |
160 (L) mm |
90 (B) mm |
8 - 10 - 12 - 14 ø mm |
1 - 2 - 3 - 4 - 5 |
Ø 10 mm |
ISO40 - DIN2080 |
17,56 kg |
8012667002923 |
450 mm |
±50 mm |
0,005 mm |
3 mm |
0,03-0,06-0,09 0,12-0,15-0,18 mm |
22 mm |
168 mm |
118 mm |
7,8 kg |
160 (L) mm |
90 (B) mm |
8 - 10 - 12 - 14 ø mm |
1 - 2 - 3 - 4 - 5 |
Ø 10 mm |
ISO50 - DIN2080 |
19,60 kg |
8012667002930 |